SHARP Dehumidifier | 30L/d, 830 ft² | PCI Tech removes Bacteria, Viruses, Mold, VOCs, Laundry mode | Japan Tech
SHARP Dehumidifier | 30L/d, 830 ft² | PCI Tech removes Bacteria, Viruses, Mold, VOCs, Laundry mode | Japan Tech
SKU:DW‑T30HM-W
Low stock
Couldn't load pickup availability


💧 30 L/day moisture removal with 4.5 L water tank
🛡️ Plasmacluster® ions for efficient deodorisation
📦 Covers rooms up to 830 sq. ft.
👕 Laundry Mode for faster indoor clothes drying
📊 Smart Sensors for temperature & humidity
🔄 Dual-louver airflow for wide, even coverage
⚙️ Caster wheels & continuous drain option for convenience
🔇 Quiet operation (34-40 dB)
🛠️ 1 Year Onsite Warranty
Product Specifications:
| Feature | Details |
|---|---|
| Model | DW‑T30HM‑W |
| Type | Dehumidifier |
| Dehumidification Capacity | 30 L/day (30 °C, 80 % RH) |
| Coverage Area (Dehumidify) | 39–77 m² (420–830 ft²) |
| Water Tank Capacity | 4.5 L with continuous drain option |
| Airflow Width | Dual louver, up/down 140°/200 cm, left/right 170 cm |
| Laundry Dry Mode | Dries clothes in ~75 minutes |
| Sensors | Humidity Temperature |
| Display | Humidity numeric readout |
| Ion Output Density | 7,000 ions/cm³ (Plasmacluster) |
| Deodorization | Plasmacluster |
| Dual Louver Airflow | Yes; auto up/down swing |
| Noise Level | 34-40 dB(A) |
| Power Consumption | Typical 325 W (Standby 1.1 W) |
| Voltage/Frequency | 220–240 V, 50 Hz |
| Unit Dimensions (W×H×D) | 359 × 248 × 665 mm |
| Net Weight | 17.2 Kg |
| Mobility | 360° caster wheels |
| Continuous Drain Option | Yes |
| Warranty | 1 Year Onsite |
| Colour | White |
| Additional Features | On-Off Timer (1-9 hrs), Child Lock |
🆚 Dehumidifier vs AC Dry Mode — Which Do You Need?
AC dry mode and a dedicated dehumidifier both reduce indoor humidity, but they work differently and suit different situations. Use the table below to decide what's right for your home.
| Factor | AC Dry Mode | SHARP DW‑T30HM-W Dehumidifier |
|---|---|---|
| Primary function | Mild dehumidification as a side effect of cooling; fan runs at low speed | Dedicated moisture removal — 30 L/day at 30 °C, 80 % RH |
| Room coverage | Limited to the room where the AC is installed | Up to 39–77 m² (420–830 sq. ft.); portable on 360° caster wheels — move it room to room |
| Humidity target | No precise humidity control; cannot hold a set % RH | Smart humidity sensor maintains your target RH level automatically |
| Works without cooling | No - AC dry mode still runs the compressor and lowers temperature | Yes - dehumidifies independently of temperature; suitable in winter or during monsoon without chilling the room |
| Monsoon / high-humidity seasons | Less effective when outdoor humidity is very high; compressor cycles off when setpoint is reached | Designed for sustained high-humidity operation; runs continuously until target RH is met |
| Tank & drainage | Condensate drains via AC pipe - no manual work needed | 4.5 L tank with auto shut-off, or connect a hose to the continuous drain port for hands-free 24/7 operation |
| Noise | Typically 40-55 dB depending on AC model | 34–40 dB(A) - quieter than most AC units in dry mode |
| Power consumption | 600-1,500 W+ depending on AC capacity | Typical 325 W - lower running cost for humidity-only tasks |
| Laundry drying | Not designed for indoor laundry drying | Dedicated Laundry Mode dries clothes indoors in ~75 minutes |
| Air purification | None (unless AC has built-in filter) | Plasmacluster® ions (7,000 ions/cm³) suppress bacteria, viruses, mold, and VOCs |
🤔 Quick Decision Guide
- Use AC dry mode if: you need slight dehumidification occasionally and your room is already cooled by the AC, and humidity is moderately high (55–65 % RH).
- Choose this SHARP dehumidifier if: humidity is persistently above 65 % RH (common in Indian monsoon seasons), you need moisture control in a room without AC, you want precise humidity targets, you dry laundry indoors, or you need to protect furniture, electronics, or health from mold and allergens.
Performance figures for the SHARP DW‑T30HM-W are based on verified manufacturer specifications (30 °C, 80 % RH test conditions). AC dry mode performance varies by make, model, and ambient conditions.
Maintainance and Care
Maintainance and Care
Empty the water tank daily or when full to ensure
proper dehumidification.
Clean the pre-filter every 2–4 weeks using a vacuum
or gentle rinse.
Replace the HEPA and carbon filters as recommended
(typically 1–3 years, depending on usage/environment).
Wipe the exterior with a soft, dry cloth; avoid using
harsh chemicals.
Ensure good airflow by keeping the unit at least 30
cm away from walls or obstructions.
Do not block the air intake or outlet during
operation.
Store in a dry area when not in use for long periods.
Customer Care Information
Customer Care Information
How to reach Sharp: -
☎️ Toll-free Number - 1800 419 4322
📧 Email - contact@sharp-oa.com
Alternatively, you can also convey your queries to Bharat Electronic through our Contact Us Page
Manufacturer/Importer Information
Manufacturer/Importer Information
SHARP, Sharp Business Systems (India) Private Limited, Plot No. 51, First Floor, Okhla Industrial Estate, Phase-III, New Delhi- 110020
Share
